How to Stop a Live Pipe Leak with Belzona 1212

A major challenge faced by maintenance engineers is the limited amount of time in which an urgent repair, such as a pipe or tank leak, must be carried out. In this video, you will see how Belzona 1212 can quickly stem a live leak with minimum surface preparation or equipment. http://www.belzona.com/1212

Belzona 1212 has built-in surface tolerant technology, enabling the material to bond tenaciously to steel substrates even when surface preparation is minimal or if the substrate is heavily contaminated with water.

Watch this video to see how Belzona can provide a cost-effective repair that can reinstate equipment for years of service.

Materials Used:
For this live leak sealing demonstration, a prefabricated bypass plate was used along with Belzona 1212 and some cable ties. For more information, please visit
http://www.belzona.com/1212

How-To Guide:
Step 1: Abrade and roughen the entire repair area for best surface preparation.
Step 2: Mix the Base and Solidifier of Belzona 1212 thoroughly until the material is streak-free. 
For more information on surface preparation, mixing and application please see the IFU. http://www.belzona.com/ViewFile.aspx?...
Step 3: Remove the plug from the bypass plate.
Step 4: Firmly apply the Belzona 1212 to the plate, pushing it well into the surface profile.
Step 5: Apply the material to the prepared bond area. 
Step 6: Position the bypass plate down firmly over the repair area. Secure the plate using cable ties during the cure.
Step 7: Remove the excess Belzona material to ensure an aesthetically pleasing finish.
Step 8: Insert the plug to stem the leak and remove the cable ties to complete the application.
Belzona 1212 is easy to mix and apply without the need for specialist tools and is ideal for repair kits and emergency situations, ensuring fast back in service time.