This short video demonstrates the high adhesive strength of Belzona 5812DW, corrosion protection system which is approved for contact with drinking water. http://www.belzona.com/en/products/50... This cost effective, two-component solvent free system, which is NSF certified, was specifically developed for safe contact with potable water and provides a coating system for metallic and non-metallic surfaces. For this video, we have used Belzona 5812DW in combination with Belzona 9241 aggregate to create a drinking water approved concrete rebuilding system for heavily damaged vertical and horizontal surfaces. Demonstration Criteria: The concrete surface was dampened with tap water and left in that condition for 24 hours. The surface was then dried off as much as possible. The moisture content prior to application was 75%. Application Procedure: Step 1: Condition the concrete with Belzona 5812 DW Step 2: Mix Belzona 5812DW with Belzona 9241DW Step 3: Apply the mixed product onto the conditioned concrete Full manufacturers application recommendations can be found: http://www.belzona.com/ViewFile.aspx?... Test Results: The adhesive strength was tested via Dolly Pull-Off testing (ASTM D4541/ISO 4624). The cohesive failure of the substrate under the adhesion test reported an average of 656 psi. Adhesive strength of Belzona 5812DW was proven to be higher than the cohesive strength of concrete. To find your local Belzona products and services supplier please visit http://www.belzona.com/en/about/disfi... Subscribe to our YouTube channel to explore our collection of How-To videos including: HOW-TO SERIES: Creation of Drainage Slope with Belzona 4154 and Belzona 5811 https://youtu.be/A8Jueh7h90Y HOW-TO SERIES: Protection of Concrete Surfaces with Belzona 5231 and Belzona 5233 https://youtu.be/MvCBKSvsfgo
