00:00 Common concrete problems include concrete voids, unleveled equipment, loose anchor bolts, and chocking. 00:15 To repair these defects, begin by removing loose surface material. Use a vacuum to suction any debris to create an ideal application area. Next, use Belzona 4911 (Magma TX Conditioner) to condition the area. The conditioner will create a surface to which Belzona 4111 can adhere to. 00:32 Pour the Belzona 4911 (Magma TX Conditioner) Solidifier into the Base container and stir until it is completely mixed. Then, use a stiff-bristled brush to stipple the product onto the application surface. 00:47 The next step in the repair process is to mix Belzona 4111. Begin by mixing Belzona 4151 Base and Solidifier in a bucket. 01:23 Next, introduce the Belzona 4111 Aggregate in increments and mix until the desired consistency is achieved. 01:51 For concrete void defects, use a wooden plank as a barrier to create a smooth edge. Apply the Belzona 4111 into the void using the provided spatula. Lastly, use a steel float to level off the product to remove entrapped air, to compact it, and to ensure maximum contact with the surface. 02:12 For unleveled equipment, pack the product into the voided space by hand. Then, use a steel float to level off the product to remove entrapped air, to compact it, and to ensure maximum contact. 02:34 To secure anchor bolts, pack the product into the space around the loose bolts. Use a steel float to level off the product. Alternatively, create a less viscous Belzona 4111 mixture for applications where pouring or cartridges are needed. 02:52 Use a funnel to pour Belzona 4111 into tight spaces. Or pour the Belzona 4111 into a cartridge, cut the tip, and insert the nozzle. Place the cartridge into a caulking gun and apply the product. 03:19 Finally, for chocking applications, glue a beam to the concrete base of the equipment. Use a funnel to pour Belzona 4111 into the voided space below the equipment. Allow it to flow around the perimeter for maximum contact. 03:41 Allow the product to cure. After, remove any formwork that was used. 🛒 To purchase this solution, head to Belzona.com to contact your local Distributor https://www.belzona.com/en/about/disfinder.aspx 🎙️ PODCAST - https://www.youtube.com/watch?v=BQ9ZWyrr3ws&list=PLrpYan0WU7kXy_OvMEwoS3MbucC-s3fbu 📝 BLOG - https://blog.belzona.com/
