The tires of off-road vehicles typically operate at low pressure, causing a great deal of compressive stress to the side wall of the tyre in contact with the ground. The stress enlarges splits and holes due to the stretching of the rubber. Belzona Elastomers quickly repair and prevent further deterioration, for that reason extending the life cycle of the tyres. For more information, please visit http://www.belzona.com/2111. In this video, we demonstrate how to do a tyre patch application to create a durable, high abrasion resistant and flexible repair. This material is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work. Materials Used: In this application, we used Belzona 2111 (D&A Hi-Build Elastomer) for surface repair, Belzona 2911 (Elastomer QD Conditioner) as a conditioner and Belzona 9341 Reinforcement tape. Read more about this material on our website: http://www.belzona.com/2111.aspx How to Guide: Step 1: Abrade to a woolly finish Step 2: Apply Conditioner 2911 Step 3: Shake Belzona 2111 Solidifier before mixing with the base Step 4: Mix thoroughly Step 5: Firmly apply into the damage area Step 6: Wet out Belzona 9341 Reinforcement tape with Belzona 2111 Step 7: Embed tape it on the area previously covered Step 8: Encapsulate with Belzona 2111 Step 9: Remove excess To find your local Belzona products and services supplier please visit: http://www.belzona.com/en/about/disfinder.aspx Subscribe to our YouTube channel to explore our collection of videos including: In-situ Conveyor Belt Repair with Belzona 2311 How to Apply a Belzona Abrasion Resistant System
